ANGOLA ALGERIA CAMEROON CHAD. CONGO EGYPT.. EQUATORIAL GUINEA GABON LIBYA. NIGERIA SOUTH AFRICA SUDAN TUNISIA OTHERS
New Innovations and Technologies Accelerate Deepwater Activities in the US Gulf of Mexico
The deepwater Gulf of
Mexico (GOM) is an integral part of US energy supply and one of the world’s most
important oil and gas provinces. As a result of its proximity to key markets and
a long history of exploration and development, the region is now seeing a
transition towards deeper and more challenging exploration and development,
including both deeper water and deeper wells. These trends are the motivation
behind a renewed drive towards advancing the state of key technologies.
Growth of US Deepwater
The distinction between shallow and deepwater can range from 656ft (200m) to
1,500ft (457m) water depth. Here, Minerals Management Service (MMS) information
is used, which defines deepwater as water depths greater than or equal to
1,000ft (305m) and ultra-deepwater as water depths greater than or equal to
5,000ft (1,524m).1
As of early 2006, there were 118 deepwater projects on production. Production
from deepwater by the end of 2004 was approximately 950,000 barrels of oil and
3.8 billion cubic feet of natural gas per day. More than 980 deepwater
exploration wells have been drilled since 1995 and at least 126 deepwater
discoveries have been announced from that effort. In the last six years, there
have been 22 discoveries in water depths greater than 7,000ft (2,134m), with 11
of those discoveries in the last two years. Approximately one-third of the
world’s deepwater rig fleet is committed to GOM service. The average size of a
deepwater GOM field discovery is several times larger than the average
shallow-water discovery, and deepwater fields are some of the most prolific
producers in the GOM. Announced volumes for these deepwater discoveries are more
than 1.8 billion barrels of oil equivalent (BOE).
The growth of activity in the deepwater GOM has accelerated over the last few
years, although it has been developing for over two decades. Deepwater
production began in 1979 with Shell’s Cognac field, and it took five more years
before the next deepwater field (ExxonMobil’s Lena field) came online. Both
developments relied on extending platform technology to greater water depths.
Over the last 14 years, all phases of deepwater activity have expanded. There
are over 8,200 active GOM leases with 54% of those in deepwater. Contrast this
with approximately 5,600 active GOM leases in 1992, with only 27% in deepwater.
On average, there were 30 rigs drilling in deepwater in 2005 compared with only
three rigs in 1992. In the period 1992–2002, deepwater oil production rose by
over 840% and deepwater gas production increased by about 1,600%. The Deep Water
Royalty Relief Act (DWRRA), which provides economic incentives to develop leases
in deepwater, has clearly had a significant impact on deepwater GOM activities.
Deepwater exploration and production growth have been enabled by remarkable
technology advances over time. These advances continue today, with many new
technologies currently in the research phase for future deployment.
Discoveries
Recent discoveries continue to expand the exploration potential of the deepwater
GOM. Of total GOM proved reserves, 99% are in Neogene-age and younger reservoirs
(Pleistocene, Pliocene and Miocene). However, several recent deepwater
discoveries encountered large potential reservoirs in sands of Paleogene age
(Oligocene, Eocene and Paleocene). The discovery of these Paleogene-age
reservoirs has opened wide areas of the deepwater GOM to further drilling,
focused on two frontier plays: the Mississippi Fan Foldbelt and the Perdido
Foldbelt.
With the drilling of the Trident and Cascade discoveries (AC 903 and WR 206) in
2001 and 2002, the potential for an extensive Lower Wilcox sand extending from
Alaminos Canyon to Walker Ridge was established. Deposition of the Lower Wilcox
appears to have been largely unaffected by salt tectonics, resulting in a thick
sand across a broad geographic area. The Cascade discovery established turbidite
sands more than 350 miles downdip of their source deltas in south
Texas.
Two further subsalt discoveries have been made in the Lower Wilcox: St Malo (WR
678) and Jack (WR 759). To date, there have been five Lower Wilcox and/or
Paleogene discoveries in
Alaminos Canyon and four
Lower Wilcox discoveries in
Walker
Ridge.
The Paleogene-age reservoirs provide a promising exploration trend. However,
there are a number of challenges that must be addressed before production can
begin. Appraisal wells must be drilled to test reservoir quality and
producibility. Other challenges include the completion and production of deep
reservoirs in the ultra-deepwater GOM, for which infrastructure must be
developed.
Successful exploration has also occurred in the eastern GOM with announced
discoveries in
DeSoto
Canyon
(Spiderman/Amazon and San Jacinto) and Lloyd Ridge (Atlas, Atlas NW, Cheyenne
and Mondo Northwest). At least six of these discoveries encountered Miocene-age
reservoirs, and all ten are in water depths greater than 7,800ft (2,378m). The
Mississippi Fan foldbelt trend saw three Lower Miocene oil discoveries in 2005:
Knotty Head (GC 512), Genghis Khan (GC 652) and Big Foot (WR 29).
Chevron’s successful production test at their Tahiti discovery well (GC 640) in
2004 undoubtedly spurred further exploration of the trend. Tahiti tested a
structural trap beneath an 11,000ft (3,354m) thick salt canopy. The discovery
well produced at a restricted rate of 15 million barrels of oil per day (MBOPD).
Rate and pressure analyses indicate that the well may be capable of a sustained
flow of as much as 30 MBOPD.
Until recently, there had been a gradual increase of drilling depth. However,
since 1996 the maximum drilling depth has increased rapidly, reaching true
vertical depths (TVDs) just below 30,000ft (9,144m) in 2002. The Transocean
Discoverer Spirit drilled the deepest well in the GOM to date: Chevron/Unocal’s
Knotty Head discovery in Green Canyon Block 512 at a TVD of 34,157ft (10,411m)
in December 2005. This recent dramatic increase in TVD may be attributed to
several factors, including enhanced rig capabilities, deeper exploration targets
and the general trend towards greater water depths.
In the last five years, 12 wells have been drilled in water depths exceeding
9,000ft (2,744m) and, in December 2003, the first well in water depths over
10,000ft (3,050m) was drilled. The water depth drilling record of 10,011ft
(3,051m) was set by Chevron in Alaminos Canyon Block 951 in late 2003.
Productivity
High production rates have been a driving force behind the success of deepwater
operations. For example, a Shell Bullwinkle well produced approximately 5,000
barrels of oil per day (BOPD) in 1992. In 1994, a Shell Auger well set a new
record, producing about 10,000 BOPD. From 1994 to mid 1999, maximum deepwater
oil production rates continued to climb. BP’s Horn Mountain project came online
in early 2002 in a water depth of 5,400ft (1,646m), with a single well maximum
rate of more than 30,000 BOPD. Since mid 2002, oil production rates have
declined in the 1,500–4,999ft (457–1,524m) water-depth interval. However,
production rates have increased steeply in the greater than and equal to 5,000ft
(1,524m) water-depth interval. The record daily oil production rate (for a
single well) is 41,532 BOPD (Troika).
In terms of gas production, maximum well rates were around 25 million cubic feet
per day (MMCFPD) until a well in Shell’s Popeye field raised the deepwater
production record to over 100 MMCFPD in 1996. Since then, the deepwater has
yielded even higher maximum production rates. In 1997, Shell’s Mensa field
showed the potential for deepwater production rates beyond the 5,000ft (1,524m)
waterdepth interval. The record GOM daily gas production rate is 158 MMCFPD (Mensa).
The average GOM deepwater oil well currently produces at about 25 times the rate
of the average shallow-water oil well, while the average GOM deepwater gas well
currently produces at about eight times the rate of the average shallow-water
gas well.
Subsea Toolkit
There were fewer than ten subsea completions per year until 1993, but this
number increased dramatically throughout the 1990s. Shallowwater subsea wells
began to make up a significant proportion of the total number of GOM subsea
wells, accounting for 151 of the 348 subsea wells by year-end 2005. Operators
have found subsea tiebacks to be valuable for marginal shallow-water fields
because of the extensive infrastructure of available platforms and pipelines. As
a result of these factors, there has been an increasing reliance on subsea
technology to develop shallow-water and deepwater fields.
The technology required to implement subsea production systems in deepwater has
evolved significantly in the last 17 years. A water depth of 350ft (107m) was
the deepest subsea completion until 1988, when the water depth record for the
GOM jumped to 2,243ft or 684m (Green Canyon 31 project). In 1996, another record
was reached with a subsea completion in 2,956ft (901m) of water (Mars project),
followed by a 1997 subsea completion in 5,295ft (1,614m) of water (Mensa
project). Currently, Coulomb has the deepest subsea production in the GOM, in a
water depth of 7,591ft (2,313m). Nearly 70% of subsea completions are in water
depths of less than 2,500ft (762m). In order for subsea wells to continue to
advance to greater water depths and harsher environments, technological
improvements are needed. Currently, the industry is working to ensure that new
advancements are developed in a safe and environmentally conscientious manner.
Technologies currently under evaluation include high-integrity pressure
protection systems (HIPPS), high-pressure, hightemperature (HPHT) materials and
subsea processing.
High-pressure, High-temperature
Future
As deepwater wells are drilled to greater depths, they begin to encounter the
same HPHT conditions that shallow-water wells see at shallower depths. HPHT
development is therefore one of the greatest technical challenges facing the oil
and gas industry today. Materials that have been used for many years now face
unique and critical environmental conditions. The industry is working on a
number of collaborative fronts to evaluate these issues and to develop
appropriate technologies to mitigate potential hazards. Such efforts include
joint research, knowledge sharing via industry conferences and focused standards
development via technical committees of the American Petroleum Institute (API),
National Association of Corrosion Engineers (NACE) and other groups.
Summary
Significant challenges exist for deepwater exploration and development.
Deepwater operations are expensive and require significant amounts of time
between initial discovery and first production. Despite these challenges,
deepwater fields have demonstrated prolific performance with successful
developments providing great rewards. In order for growth and deepening trends
to continue, technology will be a required point of leverage. It will be
required to resolve current gap challenges, such as those posed by HPHT
prospects in deepwater, and to bring further cost efficiencies into the
exploration, development and production phases.